del schisler

here is another walnut jewelry box I made 2 of the same Their are 1" solid walnut 18" wide by 11" deep by 2 3/4" high With 2 box's inside that slide around where you would like them They are sprayed with Black suede And sprayed with cabnet grade lacquer I put a router cut out on top Just to add a little to the top thanks for looking

Attached Thumbnails

 

Attached Images

 

tdiprincess

Very pretty! I really like the design on the top of the box!

gma2rjc

It's very pretty del.

You said they're sprayed with black suede? That's neat. There are so many finishes available in spray cans now. I didn't know suede was available.

I like the idea of being able to move the two little boxes.

Once again, nice job!

Barb

__________________
May your troubles be less.
May your blessings be more.
And may nothing but happiness
Come through your door.

downrightart

Very nice Del! Huh. That is cool about the spray being in suede. I had no idea that was available.

del schisler

check this site I been using them for yrs Just click and you will find lot's and different colors I have the gun for sprying Cost a little But i use it quite a bit The tube thing is what you pay for is what you get Not much good luck Thanks for looking del http://www.donjer.com/products.htm

del schisler

I posted a link to the suede site been using them for yrs lot' of items and they are nice Realy add's to the product http://www.donjer.com/products.htm

del schisler

I posted this link The suede is not from a can here is the link http://www.donjer.com/products.htm

DangerMouse

How did you do the center carving?

DM

__________________
"The only real magic in life is the magic of life itself."
For some ♠ ♥ ♣ ♦ Magical ♠ ♥ ♣ ♦ Fun, go to: http://www.youtube.com/user/MickeySoume
Now Featuring: New!--> Style14

del schisler

go here This is a good item They also have the 1212 sign pro I bought that also Sure was not very good Stay away from that Now this works http://www.milescraft.com/product/1207.html Also a video http://www.youtube.com/watch?v=x1i6dUmi9xg The one you want is the 1207 model A plung router is a must have I have 5 routers I keep one set up just for that The bit is set up Saves time They way he is doing it Is just for show and safty I use a poter cable 690 router and work better that that piece of crap he is using Take's to much time Shutting off each time After the first route is done just set off to the side running It isn't going anywhere or hurt anything Now move the templete to the next letter and do the same thing again Works good The more you do the better you get If you have some good polish put on the router face plate and the templete It will slide better Also the piece that slides in the templete good luck Also to get the center is take a stick and go from corner to corner and mark with pencel Now go from the other corner and do the same thing this will get you the center point for the templete Now also good double face tape is a must also You will see what to do The clamps that come with it Well you will see what to do with them Make sure that the wood you use to make the black piece lay flat Use wood the same thickness as the piece you are putting in the design Or it will not be the same depth all around And the design will not look right